Designed for the World Endurance Championship®, the Sentronics® Connect delivers secure communications of fuel dispensed data from the pit lane to race control.
Engineered for Precision Performance in Race Cars
The Sentronics® Connect is the ideal accessory for your FlowSonic® GT on-board ultrasonic fuel flow meter and the Sentronics RigFlow for measuring dispensed fuel.
Real-time Insights
Gain immediate access to precise fuel consumption data, empowering your race team to make critical strategic decisions on the spot.
Compliance Assurance
Easily comply all WEC regulations with accurate fuel data, ensuring fair competition for all.
Product Specification
Measurement Performance
Measurement rate
2.2 kHz
Repeatability
± 0.05% of reading
Uncertainty*
± 0.25% of reading
Operating flow range
± 8000 ml/min (±480 LPH)
Calibrated measurement range
500-4000 ml/min (30-240 LPH)
Pressure drop @ 25ºC
5kPa @ 2000ml/min, 15kPa @ 4000ml/min (WEC)
Temperature measurement
2 x 1000 ohm RTD (1/3 DIN standard)
*Calculated according to ISO/TR using root-sum square method yielding 95% confidence
Flow Outputs and Functions
Calibrated volumetric flow rate (ml/min)
Calibrated cumulative volumetric flow rate (ml)
Calibrated mass flow rate (g/min)
Calibrated cumulative mass flow (g)
Max/min logging
Elapsed time counter (power on, ETI)
Run time (flow time, RTI)
Speed of sound (m/s)
Diagnostics via CAN
Data Security and Encryption
Firmware security check-sums
Mechanical
Dry weight
330 g
Fuel capacity
15 ml
O-ring seal elastomer
FPM fluorocarbon
Wetted materials
FPM, anodised aluminium alloy, stainless steel
Fluid operating pressure
50 kPa to 2000 kPa, 8000 kPa maximum burst
Fuel line connectors
-6AN ttings 9/16-inch UNF thread
Electrical
Voltage
8V to 30V DC
Current
< 70mA @ +12V DC
Voltage protection
Over-voltage 45V DC, reverse polarity -45V DC
Deutsch sensor connector
ASDD006-09PD-FI-952K
Deutsch mating connector
ASDD006-09PD-FI-952K
CAN Communications
Design standard
ISO 11898-2 (high-speed applications)
Message format
2.0A (11-bit identifer)
Baud rate
1 Mbit/sec
CAN termination resistor
No
Conguration interface
3.3V serial interface
Fuel Compatibility
Pump petrol or diesel
F1® petrol blends
Methanol/petrol blends
WEC standard bioethanol/ETBE blend
Ethanol/petrol blends
IMSA standard E20C
Neat butanol, methanol, or ethanol
IMSA standard E10
Sustainable biofuel
Environmental
Storage temperature
-40ºC to 85ºC
External pressure rating
300 kPa
Other Products
FlowSonic® Aviation Fuel Flow Meter
The FlowSonic® Aviation High Flow Fuel Meter is an ideal tool for efficiency-focussed R&D and emissions testing and well-suited to measure high-volume jet engine fuel.
RigFlow
The RigFlow advanced ultrasonic flow meter provides race teams and governing bodies the data needed for measuring and assessing fuel usage during races.
FlowSonic® GT
The FlowSonic® GT is designed to deliver reliable fuel flow measurement for automotive engines of every type. Suitable for FIA® WEC & IMSA Sportscar Championships.
FIA® F1® Encrypted Reference Flow Meter
Designed to uphold fair competition, sporting integrity and ensure compliance of fuel usage by delivering fully encrypted fuel flow measurement of automotive engines to governing bodies.
FlowSonic® Sport
The FlowSonic® Sport ultrasonic sensor from Sentronics™ is used across the upper echelons of international motorsport championships for unrivalled fuel flow monitoring in harsh conditions.
FlowSonic® HF
The FlowSonic® HF has been designed for the high-volume fuel, oil, and coolant flow conditions found in heavy-duty commercial and industrial vehicle powerplants.
FlowSonic® LF
The FlowSonic® LF has been designed for the ultra low-volume fuel flow conditions found in today’s high-efficiency road car engines, making it an ideal tool for R&D as well as emissions testing to the new RDE and WLTP standards.